Syra 2S-400

ON/OFF management/command module for lamp from 250 to 400W. Power Iine communication. Installed in the pole.

request a quote


– Power line communication technology
– Detection and signaling of the lamp working status:

  • lamp on and properly working at full power 
  • anomaly lamp with faulty, missing or insufficient  capacitor 
  • low lamp voltage anomaly  
  • interrupted lamp or faulty ignitor anomaly  
  • disconnected lamp anomaly (load absence downstream the SYRA 2S ) 
  • flashing or exhausting lamp anomaly 
  • broken fuse or missing answer by SYRA 2S 

Command of:

  • lamp switching on  
  • lamp switching off 
  • ignitor automatic switching off 

– Chance to manage 1.022 SYRA over a unique line
– Collection and modification of the status and programming parameters directly from the cabinet
– Installation inside the lighting body slot in series on the power supplying line downstream the fuse

– Connection through FG7OR-NPI 2 x 2,5 cables, 40 cm length

  • Working voltage-230 V~ +/- 10%
  • Absorbed power in stand-by phase-0,5W
  • Max current provided-4 A
  • Outdoor user active power-20W min. – 250W max. (Syra 3)
  • Surge protection by varistor and PTC-400 V
  • Working environment temperature- 25 ÷ + 65 °C, @ 90 % max U.R.
  • Box features-Natural nylon PA 66 blue colour
  • Electrical Insulation degree-+ 70° C
  • Temperature limit-Class II
  • Dimension-50 x 101 x 36 mm
  • Weight-470g

Get the full datasheet here

See all FAQS below:

Faqs (Supervision System)
Faqs (Common)
Faqs (Cabinet Remote Control)
Faqs (Lamp remote Control)