Syra 3

Lamp ON/OFF and reduction management/control module to be combined with bi-power ballast. Power line communication. For power lamp from 20 to 250W. Installed in the light fixture.
Browse image gallery

request a quote

Features:

– Communication over power supply line by  Power-line technology (PLC)

– Detection and signaling of the lamp working status:

  • lamp on and properly working at full power
  • lamp on and properly working at reduced power
  • anomaly lamp with faulty, missing or insufficient capacitor
  • low lamp voltage anomaly
  • interrupted lamp or faulty ignitor anomaly
  • disconnected lamp anomaly (load absence downstream the SYRA 3)
  • flashing or exhausting lamp anomaly
  • broken fuse or missing answer by SYRA 3

– Command of:

  • lamp switching on at full power
  • lamp switching on at reduced power
  • lamp switching off
  • ignitor automatic switching off

– Chance to manage the programmed reduction, without cabinet control unit.

– Management of up to 1.022 SYRA over a unique line

– Collection and modification of the status and programming parameters directly from the cabinet.

– Installed within the lighting fixture (thermal test suggested)

Specifications:
  • Working voltage-230 V~ +/- 10%
  • Absorbed power in stand-by phase-0,5W
  • Max current provided-4 A
  • Outdoor user active power-20W min. – 250W max. (Syra 3)
  • Surge protection by varistor and PTC-400 V
  • Working environment temperature- 25 ÷ + 65 °C, @ 90 % max U.R.
  • Box features-Natural nylon PA 66 blue colour
  • Electrical Insulation degree-+ 70° C
  • Temperature limit-Class II
  • Protection degree-IP65, IP10 with clamps
  • Dimension-52 x 98 x 45 mm
  • Weight-400g

Get the full datasheet here

See all FAQS below:

Faqs (Supervision System)
Faqs (Common)
Faqs (Cabinet Remote Control)
Faqs (Lamp remote Control)