Syra E-10v
ON/OFF management/control and dimming module for lamp powered from 70 to 100W equipped with electronic ballast 1-10V (Philips-HID DynaVision). Power line Communication. Installed in the light fixture.request a quote
Features:
– Communication over power supply line by Power-line technology (PLC)
– Detection and signaling of the lamp working status:
- lamp on and correctly working with full power supply
- lamp on and correctly working with reduced power supply
- lamp anomaly caused by faulty, absent or insufficient capacitor
- low power supply lamp anomaly
- disconnected lamp anomaly (load absent downstream the SYRA E)
- flashing or exhausting lamp anomaly
- broken fuse anomaly or answer absence from the SYRA E
– Command of:
- lamp on at full power level
- lamp on at reduced power level with management of 16 dimming levels with step value 0,5v
- lamp off
– Chance to manage 1.022 SYRA over a unique line
– Collection and change of the status and programming parameters directly from the cabinet
– Installation inside the lighting body
Specifications:
- Working voltage-230 V~ +/- 10%
- Absorbed power in stand-by phase-0,5W
- Ballast-230V~ ± 10% 50Hz– 60Hz; max 250W
- Working environment temperature- 25 ÷ + 65 °C, @ 90 % max U.R.
- Box features-Natural nylon PA 66 blue colour
- Electrical Insulation degree-+ 70° C
- Temperature limit-Class II
- Protection degree-IP65, IP10 with clamps
- Dimension-52 x 98 x 45 mm
- Weight-400g
Get the full datasheet here
See all FAQS below: