Syra E-400

ON/OFF management/control and dimming module for lamp powered from 250 to 400W equipped with electronic ballast 1-10V. Power line communication. Installed in the light fixture.

request a quote

Features:

- Communication over power supply line by  Power-line technology (PLC) 

- Detection and signaling of the lamp working status: 

  • lamp on and correctly working with full power supply 
  • lamp on and correctly working with reduced power supply 
  • lamp anomaly caused by faulty, absent or insufficient capacitor 
  • low power supply lamp anomaly 
  • disconnected lamp anomaly (load absent downstream the SYRA E) 
  • flashing or exhausting lamp anomaly 
  • broken fuse anomaly or answer absence from the SYRA E 

- Command of: 

  • lamp on  at full power level 
  • lamp on  at reduced power level with management of 16 dimming levels with  step  value 0,5v 
  • lamp off 
 

- Chance to manage 1.022 SYRA over a unique line 

- Collection and change of the status and programming parameters directly from the cabinet 

- Installation inside the lighting body (thermal test 

Specifications:
  • Working voltage-230 V~ +/- 10%
  • Absorbed power in stand-by phase-0,5W
  • Ballast-230V~ ± 10% 50Hz– 60Hz; max 250W
  • Working environment temperature- 25 ÷ + 65 °C, @ 90 % max U.R.
  • Box features-Natural nylon PA 66 blue colour
  • Electrical Insulation degree-+ 70° C
  • Temperature limit-Class II
  • Protection degree-IP65, IP10 with clamps
  • Dimension-52 x 98 x 45 mm
  • Weight-400g

See all FAQS below:

Faqs (Supervision System)
Faqs (Common)
Faqs (Cabinet Remote Control)
Faqs (Lamp remote Control)